VW Tools Catalog - Page 4

#4321 - 40HP FLAT

#4322 - 40HP STEP 1.5MM STEP

#4323 - 1600cc FLAT

#4324 - 1600cc STEP 1.5 MMSTEP

#4325 - 92 FLAT

#4326 - 92 STEP 1.5MM STEP

#4327 - 94 FLAT

#4328 - 94 STEP 1.5MM STEP

#4329 - 1700 FLAT

#4330 SERIES - SINGLE BLADE CARBIDE SURFACERS.
$150.00 each

#4330 – 1700 cc STEP 1MM STEP

#4331 - 1800 FLAT, 2 LITRE FLAT

#4332 – 1700 cc STEP 1MM STEP

#4333 - 356-912 PORSCHE

$4334 - 911 PORSCHE

# 4300 SERIES - DOUBLE BLADE CARBIDE SURFACERS, BORE CYLINDER HOLE AND DECK AT THE SAME TIME.
$225.00 each

#4301 – 40 HORSE POWER FLAT CYLINDER SURFACER AND DECK

#4302 – 1600 cc FLAT CYLINDER SURFACER AND DECK

#4303 – 1600 cc STEP CYLINDER SURFACER AND DECK

#4304 – 92 MM FLAT CYLINDER SURFACER AND DECK

#4305 – 92 MM STEP CYLINDER SURFACER AND DECK

#4306 – 94 MM FLAT CYLINDER SURFACER AND DECK

#4307 – 94 MM STEP CYLINDER SURFACER AND DECK

#4308 – 1700 cc FLAT CYLINDER SURFACER AND DECK

#4309 – 1700 cc STEP CYLINDER SURFACER AND DECK

#4310 – 2000 cc FLAT CYLINDER SURFACER AND DECK

#4311 – 2000 cc STEP CYLINDER SURFACER AND DECK

#3350 SERIES - CENTERING RING FITS CASE AND HEAD

$50.00 each

#3351 – 1200cc 40 HP CASE AND HEAD CENTERING RING

#3352 - 1600 cc CASE AND HEAD CENTERING RING

#3353 - 92 MM CASE AND HEAD CENTERING RING

#3354 - 94 MM CASE AND HEAD CENTERING RING

#3355 - 1700cc CASE AND HEAD CENTERING RING

#3356 - 2000cc CASE AND HEAD CENTERING RING

#4100 VALVE GUIDE IMPACT DRIVERS

#4101 – 6MM VALVE GUIDE IMPACT DRIVER REMOVES GUIDES WITH IMPACT GUN
$20.00 each

#4102 – 7MM VALVE GUIDE IMPACT DRIVER REMOVES GUIDES WITH IMPACT GUN
$20.00 each

#4103 – 8MM VALVE GUIDE IMPACT DRIVER REMOVES GUIDES WITH IMPACT GUN
$20.00 each

#4104 – 9MM VALVE GUIDE IMPACT DRIVER REMOVES GUIDES WITH IMPACT GUN
$20.00 each

#4110 – VALVE GUIDE BOSS CUTTING TOOL
$50.00 each

# 4200 SERIES - VALVE SEAT HOLE CUTTERS
$50.00 each

#4201 - 1.382" DESIGNED FOR USE WITH 32MM-33MM VALVE SIZE.

#4202 - 1.400" DESIGNED FOR USE WITH 32MM-33MM VALVE SIZE

#4203 - 1.475" DESIGNED FOR USE WITH 35.5MM - 36MM VALVE SIZE.

#4204 - 1.507" DESIGNED FOR USE WITH 35.5MM-37MM VALVE SIZE.

#4205 - 1.525" DESIGNED FOR USE WITH 35.5MM-37MM VALVE SIZE

#4206 - 1.625" DESIGNED FOR USE WITH 39MM-40MM VALVE SIZE

#4207 - 1.697" DESIGNED FOR USE WITH 39MM-42MM VALVE SIZE

#4208 - 1.750" DESIGNED FOR USE WITH 42MM-44MM VALVE SIZE

#4209 - 2.010" DESIGNED FOR USE WITH 48MM-50MM VALVE SIZE SPECIFY PILOT SIZE WHEN ORDERING WE MAKE ANY SIZE VALVE SEAT HOLE CUTTER YOU NEED AT NO EXTRA CHARGE.

ALL CUTTERS ARE 7/8" DIAMETER SHANK UNLESS SPECFIED OTHERWISE.

#4200B - REPLACEMENT BLADES FOR VALVE SEAT HOLE CUTTERS $15.00 each

Here is a picture of our head angle plate mounted to a mill table where the seat hole is being cut.

#1200 - BAR MEASURING DEVICE 

$100.00 EACH

# 1 # 2 # 3 #4  

CHECK YOUR PORTA TOOL ALIGN BORE BAR WITH CUTTERS ON. MEASURES SERIES 3000 ALIGN BORE CUTTERS, SERIES 4200 SEAT CUTTERS,  AND #5000 CAM BORE BAR QUICKLY AND EFFORTLESSLY. USE ON ANY BORING BAR WITH A DIAMETER OF 7/8"-1". (#1) WORKS WITH BAR MEASURING DEVICE. (# 2) FOR MEASURING SEAT CUTTERS. (# 3) FOR MEASURING ALIGN BORE BARS. (#4) FOR MEASURING AND ADJUSTING OUR CAM BORE BAR. (#5) FOR MEASURING BORING BARS (NO PIC).

#1250 - BAR MEASURING DEVICE AND ADJUSTING STAND  THIS TOOL IS USED WITH #1200 BAR MEASURING DEVICE TO ADJUST PORTA-TOOL CUTTERS
$50.00 each

#1200 BAR MEASURING DEVICE IN USE ON #1250 STAND

#4500 SERIES - CARBIDE TIPPED VALVE GUIDE REAMERS. STAY SHARPER LONGER
$80.00 each

#4502 - 7MM VALVE GUIDE REAMER

#4503 - 8MM VALVE GUIDE REAMER

#4504 - 9MM VALVE GUIDE REAMER

#4505 -10MM VALVE GUIDE REAMER

Intake Valve Seats

Exhaust Valve Seats